Frequently Asked Questions
Why should our team license Belcarra instead of developing in-house Windows drivers?
Developing custom Windows kernel-mode drivers requires specialized NDIS/WDM engineering expertise, complex Microsoft driver signing submission workflows, and continuous maintenance across every Windows 11 update and ARM64 chipset release. Belcarra delivers a mature, field-proven solution powering millions of devices worldwide—reducing development timelines from months to days at a fraction of the cost.
What is the advantage of a USB network connection compared to a wireless connection?
For smart hardware, medical equipment, and industrial instruments, choosing USB networking over Wi-Fi or Bluetooth eliminates several major commercial, operational, and customer support bottlenecks:
- Eliminates the "Out-of-Box" Provisioning Dilemma: Headless smart devices face a chicken-and-egg problem: configuring Wi-Fi requires a temporary soft-AP hotspot or Bluetooth pairing step, leading to frequent setup dropouts and customer support calls. With USBLAN, plugging in the USB cable immediately creates a private Ethernet link. Customers simply open their browser to
http://192.168.x.xwithout pairing or credential exchanges. - Bypasses Corporate and Hospital IT Blockades: Enterprise Wi-Fi networks enforce strict 802.1X authentication, client device isolation, and restrictive firewalls that prevent computers from discovering wireless IoT devices. USBLAN creates an isolated, local point-to-point network directly between host and device without requiring IT department approval or Windows administrator rights.
- Physical Air-Gapped Security: Radio interfaces can be eavesdropped, jammed, or deauthenticated. In sensitive environments (such as hospital surgical suites, defense installations, and SCADA industrial floors), wireless transmitters are often banned by policy. A USB connection guarantees that only personnel with physical possession of the device can access its interface.
- Substantial BOM Savings and Zero Radio Certification: Adding Wi-Fi or Bluetooth hardware adds $5 to $15+ to every unit's Bill of Materials (BOM) and requires mandatory, expensive regulatory RF certifications (FCC, CE RED, and Bluetooth SIG fees) costing $30,000 to $80,000+ per hardware spin. USBLAN uses the microcontroller's existing, built-in USB peripheral hardware for zero additional radio cost.
- Simultaneous Power and Charging: A single standard USB cable delivers both high-speed data communications and device power or battery charging, eliminating extra power adapters.
For a detailed technical comparison matrix and low-level transfer mechanics, see the Driver Overview and Architecture: Interface Comparison Table →
Can our engineering team evaluate USBLAN on our hardware before licensing?
Yes. Belcarra provides OEM Demonstration Driver Kits for qualified engineering teams. Engineering teams can submit an OEM Evaluation Driver Request to specify target architectures, USB VID/PID, protocols, and DHCP settings. Demonstration kits include driver binaries for Windows 11 (AMD64 and ARM64) and Windows 10 (AMD64), sample INF files, diagnostic tools, and direct technical consultation to assist with your prototype bring-up. The demo driver runs for 30 minutes per session, after which the device must be replugged to reset.
How does Belcarra's OEM licensing work?
Belcarra provides commercial OEM licensing tailored to your deployment requirements, including enterprise and site license arrangements. Every license includes turnkey driver packaging customized with your company name and either your USB-IF VID/PID or a dedicated PID allocated under Belcarra's official Vendor ID, along with ongoing driver maintenance and compatibility across Windows OS updates.
What are USB Vendor IDs (VID) and Product IDs (PID)?
Every USB hardware device reports a 16-bit Vendor ID (VID) and a 16-bit Product ID (PID) during USB bus enumeration (for example, VID_15A2&PID_0054):
- Vendor Identification Number (VID): Assigned exclusively by the USB Implementers Forum (USB-IF at USB.org) to uniquely identify the hardware company or OEM.
- Product Identification Number (PID): Assigned internally by the OEM to identify the specific product model, firmware revision, or hardware variant (supporting up to 65,536 distinct product numbers per VID).
On Windows hosts, the Plug-and-Play (PnP) subsystem uses the combined Hardware ID (USB\VID_xxxx&PID_xxxx, plus interface numbers &MI_xx for composite devices) to match and load the customized Belcarra USBLAN driver.
Can Belcarra provide a Vendor ID (VID) and Product ID (PID) for our hardware?
Yes. This is a major financial and operational benefit of licensing from Belcarra.
While OEMs with their own USB-IF Vendor ID can use their assigned identifiers, hardware manufacturers are not required to purchase one. Belcarra can allocate a dedicated Product ID (PID) under Belcarra's official USB-IF Vendor ID for your device. This eliminates the substantial annual membership dues or non-member purchase fees required by USB.org, saving licensees considerable development funds and administrative effort.
How does Belcarra use VID and PID for custom driver packages?
When licensing Belcarra USBLAN, Belcarra customizes the driver INF package with either your own official VID and PID, or a dedicated PID allocated under Belcarra's Vendor ID. This guarantees seamless, conflict-free Plug-and-Play driver installation on Windows 11 (AMD64 and ARM64) and Windows 10 (AMD64) branded with your company and product names.
How are Belcarra USBLAN drivers tested and validated?
Belcarra executes an extensive, automated verification regimen across all supported host baselines—Windows 11 (AMD64 and ARM64) and Windows 10 (AMD64)—to ensure production stability before release:
- Automated Cable Replug Cycling: Using Belcarra's open-source usbtestnet test harness, devices undergo repeated software disconnect/reconnect cycles via
devconto verify driver recovery, PnP adapter instantiation, and network stack re-attachment without host memory leaks or system hangs. - Remote Hardware Testbeds: Automated qualification pipelines leverage Raspberry Pi USB gadgets controlled via pigadget_mcp (Model Context Protocol), cycling dynamically across CDC-NCM, CDC-EEM, CDC-ECM, and RNDIS protocols.
- Sustained Throughput and Latency: Continuous large-volume data transfers verify packet aggregation, MTU boundaries, and host CPU utilization under sustained network loads.
- Sleep, Resume and Power State Transitions: Rigorous validation across Modern Standby (S0ix) and traditional suspend/resume states ensures that network link state and IP route bindings recover immediately upon system wake.
What is an SBOM and how does Belcarra support supply chain compliance?
A Software Bill of Materials (SBOM) is a formal, machine-readable inventory of software components, dependencies, build versions, and cryptographic checksums that comprise a software release. With expanding regulatory frameworks such as the EU Cyber Resilience Act (CRA) and US Executive Order 14028 / NTIA guidelines, OEMs are increasingly required to document and track all third-party software embedded in or distributed with their products.
Belcarra delivers independent SPDX-standard SBOMs for each master driver kit and nested customer redistributable package. Each release is accompanied by cryptographic hash manifests and DigiCert-signed catalog files, allowing device manufacturers to seamlessly satisfy vulnerability management audits, supply chain security reviews, and regulatory reporting requirements.
How do I troubleshoot Device Manager error codes (Code 28, Code 10, Code 43)?
When Windows encounters an issue during USB device enumeration or driver binding, Device Manager reports a specific status code:
- Code 28 ("Drivers for this device are not installed"): Indicates Windows Plug-and-Play (PnP) cannot find an INF matching the USB Vendor ID (VID), Product ID (PID), or composite sub-interface (
&MI_xx). Ensure the hardware IDs match your custom INF package, or purge stale OEM INF files from the Driver Store. - Code 10 ("This device cannot start"): Indicates the driver loaded but the device firmware failed during protocol handshake or endpoint initialization on Endpoint 0 (such as
SET_ETHERNET_PACKET_FILTERorGET_NTB_PARAMETERS). - Code 43 ("Windows has stopped this device because it has reported problems"): Indicates low-level USB bus reset timeouts, physical cable signal integrity issues, or peripheral controller (UDC) firmware crashes.
For complete diagnostic instructions, refer to the USBLAN Troubleshooting and Diagnostics Guide →
How do I remove stale driver packages from the Windows Driver Store?
When testing prototype firmware or iterating on INF configurations, Windows may cache previously installed packages in the Driver Store. To perform a clean removal:
- Unplug the device to prevent immediate re-enumeration.
- In Device Manager, right-click the network adapter, select Uninstall device, and check Attempt to remove the driver for this device.
- Open an elevated Command Prompt or PowerShell and inspect published packages:
pnputil /enum-drivers pnputil /delete-driver oemXX.inf /uninstall /force
For the complete clean uninstall workflow, see the Driver Store Cleanup Procedure →
How can our team capture real-time driver trace logs during bring-up?
Belcarra USBLAN drivers emit real-time kernel diagnostic output using the standard Windows kernel debugging subsystem, viewable with Microsoft Sysinternals DebugView (Dbgview.exe):
- Production driver output: Drivers in both evaluation kits and regular licensed kits are labelled Production. They emit a concise set of diagnostic messages displaying the driver version, build number, and active option settings.
- Verbose checked/debug kits: If your engineering team needs deeper insight—including endpoint pipe transitions, CDC-NCM NTB parameters, or Endpoint 0 control request monitoring—you can request a checked/debug (chk) driver kit from Belcarra for prototype bring-up.
- How to capture: Run DebugView as Administrator, enable Capture > Capture Kernel (Ctrl+K), and filter by
USBLAN*.
For detailed step-by-step logging instructions, see Kernel-Mode Trace Logging with DebugView →